Classic Matt - Interior & exterior enamel matt Paint

Characteristics: Classic is an alkyd based enamel undercoat or top coat providing a smooth flat finish good opacity , with slandered color

Recommended Use: Recommended as a finish coat.  For interior and exterior drywall, , plaster, concrete and masonry. May be applied to primed or previously coated surfaces.

Physical Characteristics

Finish

matt paint

Colour

White  and standard color

Solids/Volume

60.3%

Density

1.54 kg/L

Viscosity by cup ford 4

12-13 min

Film Thickness
Wet film / dry film

90micron / 54.27 micron

Thinning

If thinning is necessary, thin up to a maximum Of 10% white spirit

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Theoretical Coverage

10-11 mē/liter

Gloss @60

Less than 4

Surface Preparation: All surface to be clean and dray. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. New Construction: Dependent on yard procedures, consult your Eagle Representative.

Application Methods: Method: Brush, roller or spray

Drying: Dry time is approx 1 hours and recoat after 4-6 hours and full curing over night . The dry time will vary with temperature and humidity.

Packing: (Gallon: 5kg / Box:4 cans) - Drum:20kg - (Gallon : 2,5 litre / box : 4 gallon) - (Cans : 1 kg - box : 12 cans).

Storage & Shelf-life: Minimum 24 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application

  • For steel
    • One or 2 coat of eagle primer fast dry or primer antirust or premolac
    • 2 coat of elnesr 3000 or golden eagle gloss or polynet gloss or poly net semi gloss and polynet matt classic matt
  • For wood
    • 0ne coat of classic matt
    • 2 coat of elnesr 3000 or polynet gloss or polynet semi gloss  or golden eagle gloss and golden eagle matt
  • For wall
    • 2 coat of emultex putty
    • One coat of classic matt
    • One coat of high emultex
    • 2 coat of super eagle flat , super eagle silk , eagle plus
  • OR
    • 2 coat of emultex emulsion
    • One coat of classic matt
    • 2 coat of elneser 3000 or polynet gloss or golden eagle gloss and golden eagle matt
Get in touch
Contact US