|
Characteristics: Emultex putty is
based on homo polymer PVA ,very smooth film with good hiding power.
Recommended Use: Recommended as a
putty Specify for interior drywall, plaster, concrete and masonry.
Physical
Characteristics
|
Finish |
MATT |
|
Colour |
White |
|
Solid/ volume
|
59% ±
2 |
|
Density |
1.70 kg/L ± 3 |
|
Viscosity by Brookfield
viscometer |
125 - 130 KU |
|
Film Thickness - Wet film/dry
film |
200 -300 micron / 120 –
180micron |
|
Thinning
|
If thinning is necessary, water is the
thinner |
|
Recommended Coats |
Apply 2 coats to appropriately prepared substrate
|
|
Theoretical
Coverage |
4 -5 m²/L |
|
Flash Point
|
------------------ |
Surface Preparation: Putty only
clean, dry surfaces. Remove all grease, oil, wax, or other material by solvent
or detergent washing. Remove all loose, flaking or chalking surfaces. New
Construction: Dependent on yard procedures, consult your Eagle
Representative.
Application Methods: Method:
knife putty
Drying: Dry time is approx.1/2
hour. The dry time will vary with temperature and humidity.
Packing: 18kgm package or pails -
4kg gallon cans
Storage & Shelf-life: Minimum
36 months in closed container. Keep container in a well-ventilated area. Close
container after each use. Keep lid tightly closed during storage. Protect from
direct sunlight and heat. The applicator should obtain more detailed information
from the product label.
Health & Safety: Avoid
contacts with eyes. Wash hands after use. Please read and observe all
precautionary notices on container labels.
DISCLAIMER: The technical data
presented in this bulletin are based upon the best available data and practices
known to Eagle Paints at the present time. Since Eagle Paints is constantly
improving its coatings and paint formulas, future technical data may vary
somewhat from what was available when this bulletin was printed. Please contact
your Eagle Sales Representative for the most up-to date information. Your
feedback is important to us. If you have any comments or suggestions regarding
our products and services, please share them with us.
Product for
application
- For interior
- 2 coat of emultex putty
- One coat of eagle interior primer
- One coat of high emultex emulsion or emultex emulion
- 2 coat of super eagle flat or mega emulsion or super eagle silk or eagle
plus
|
