Thermo plastic acrylic enamel gloss - Interior & exterior Paint

Characteristics: thermo plastic acrylic top coat for interior and Exterior used providing a durable gloss finish , with good hardness , high opacity , high resistance to environmental condition.

Recommended Use: Recommended as a finish coat. Specify for interior and exterior steel, , concrete masonry.

Physical Characteristics

Finish

Gloss

Colour

White

Solid/volume

38.5

Density

1.16kg/L

Viscosity

4-5 min

Film Thickness
Wet film/ dry film thickness

90 micron / 34.65 micron

Thinning

If thinning is necessary, thin up to a maximum Of 10% Xylene

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Theoretical Coverage

10 – 11  m²/L      

Gloss @ 60

80-90 degree

Surface Preparation: All surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. New Construction: Dependent on yard procedures, consult your Eagle Representative.

Application Methods: Method: Brush, or spray

Drying: Dry time is approx 30-45 min.  recoated after 12 hours. The dry time will vary with temperature and humidity.

Packing: 15 kg pails.    

Storage & Shelf-life: Minimum 12 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.
 
Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application:

  • For steel
    • One or 2 coat of eagle primer fast dry
    • One coat of eagle thermo plastic acrylic enamel gloss
Get in touch
Contact US