Eagle thermo plastic acrylic Varnish - Interior & exterior Paint Top coat varnish

Characteristics: thermo plastic acrylic varnish top coat for interior and Exterior used providing a durable gloss finish for metal coating.

Recommended Use: Recommended as a finish coat. Specify for interior and exterior metal , concrete masonry.

Physical Characteristics

Finish

 Gloss

Colour

 Clear watery in color   

Solid/volume

28.3

Density

0.88 kg/L

Viscosity

2.5 min

Film Thickness
Wet film/ dry film thickness

60 micron  / 17 micron

Thinning

If thinning is necessary, thin up to a maximum Of 10% Xylene

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Theoretical Coverage

16.6  mē/L     

Gloss @ 60

80-90 degree

Surface Preparation: All surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. New Construction: Dependent on yard procedures, consult your Eagle Representative.

Application Methods: Method: dipping , or spray.

Drying: Dry time is approx 30 min. recoated after 12 hours. The dry time will vary with temperature and humidity.

Packing: 15 kg pails or drum 180 kg

Storage & Shelf-life: Minimum 12 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.
 
Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application:

  • For coating the metal
    • One coat on the metal
Get in touch
Contact US