|
Characteristics:
- High quality professional water base transparent glue
- Resistant to humidity, heat, acids and alkalis.
Exceptionally high binding power and very fast setting time NG
Recommended Use: - Wood glue and wood to lamination.
- Building materials as asbestos sheet and fiberglass
- Leather
- Book binding
- Cardboard and papers
- Wall papers and carpets
- All other general purposes.
Physical Characteristics
|
Finish |
Transparent |
|
Solid/volume |
33.8%±3 |
|
Density |
1.02kg/L ±0.05 |
|
Viscosity @ spindle 7 rpm20 |
55000-70000 CP |
|
Film Thickness wet/ dry |
80 micron / 27 micron |
|
Thinning |
If thinning is necessary, thin up to a maximum
Of 10% Water
|
|
Recommended Coats |
Apply one coats to appropriately prepared substrate |
|
Theoretical Coverage |
12.5 m ² /L |
|
Tinsel strength |
55-65 N/mm2 |
Surface Preparation: Dry surfaces. Remove all grease, oil, wax, or other material.
Application Methods: Method: Brush, roller or spray
Drying: Dry time is approx.1/2 hour. The dry time will vary with temperature and humidity. Use when the temperature between 10 _ 35 degree centigrade
Packing: 1kg
Storage & Shelf-life: Minimum 12 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.
Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.
DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.
|
