Eagle Paint Remover - Interior & exterior use

Characteristics: Special product for remove any paint from the substrate.

Recommended Use: Recommended as a paint remover

Physical Characteristics








1.14 kg/L

Viscosity by Brookfield  viscometer

15000-20000 cp

Film Thickness




Recommended Coats

Apply 2 coats to remove all the paint from the substrata

Theoretical Coverage

2-4 mē /L

Flash Point


Surface Preparation: The surface to be clean. Cutting the paint surface and brushed by eagle paint remover.

Application Methods: Method: Brush,  knife putty.

Drying: Leave the paint remover for 5 min. and then remove the paints from the substrate.

Packing: Cans : 700 gm - shrink:6 cans.

Storage & Shelf-life: Minimum 6 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application:

  • For steel
    • Scratch the metal surface which need to remove the paint from the surface
    • Put a thin layer from eagle paint remover and wait for 5 min
    • Remove the paint
Get in touch
Contact US