Polyester Sealer - Interior & exterior Sealer

Characteristics: A solvent base clear sealer based on unsaturated polyester with zinc stearate , have good sand ability ,giving good leveling properties, excellent filling , good coverage area  applied for different kind of wood.

Recommended Use: Recommended as a sealer coat Specify on interior and exterior wood work.

Physical Characteristics








1.1 kg/L

Viscosity by Brookfield viscometer

< 3300 CP

Film Thickness
Wet film/ dry film thickness

90 micron / 50.22 micron


If thinning is necessary, thin using acetone

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Theoretical Coverage

11-12 mē/L

Flash Point


Surface Preparation: All the surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent. Remove all loose, flaking or chalking surfaces.

Application Methods: Method: Brush, or spray gun.

Drying: Dry time is approximately 8--10  hours to sand ability over night .The dry time will vary with temperature and humidity.

Packing: pails :10kg or pails :16Kg

Storage & Shelf-life: Minimum 12months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application

  • For wood
    • 0ne coat of N.C. sealer or polyester sealer
    • 2 coat of flatting varnish or top urethane varnish or polyurethane varnish 2K
Get in touch
Contact US