Eagle Polynet Fast Dry - Interior & exterior enamel for steel

Characteristics: Eagle polynet fast dry is enamel solvent base formed from special resin designed to give fast dry film. This film gives good adhesion , high opacity , high scratch resistance

Recommended Use: Recommended as a top coat for steel and constructions  Specify for interior and exterior enamel

Physical Characteristics




Standard color


 35 - 40%


1.09 – 1.12  kg / L


5 – 7 min

Film Thickness
Wet film/ dry film thickness

90 micron / 31.5 : 36


If thinning is necessary, thin up to a maximum Of 10% xylem

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Theoretical Coverage

11 - 12 mē /l

Touch dry

15 – 20 min

Complete dry

Over night

Gloss @ 60degree

55 -60 degree

Shelf life

12 months

Surface Preparation: All the surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces. Consult your Eagle Representative.

Application Methods: Method: Brush, roller or spray

Drying: Dry time is approx15 min to be recoated after 2 hours and full cure 24 hours. The dry time will vary with temperature and humidity.

Packing: Pails 20 kg - Drum 200 kg         

Storage & Shelf-life: Maximum 12 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application:

  • For steel
    • One or 2 coat of eagle primer fast dry
    • 2 coat of elnesr 3000 or golden eagle gloss or polynet gloss or poly net semi gloss and polynet matt or  polynet fast dry
Get in touch
Contact US