Poly urethane gloss Varnish 2K - Interior & exterior varnish

Characteristics: A solvent base2 component clear varnish based on special resin and poly iso – cyanate  , have good adhesion , high resistance to scratch , have high gloss ,high resistance to environmental condition, high abrasion resistance, and high resistance to alkali , water and detergent.

Recommended Use: Recommended as a finish coat varnish Specify on interior and exterior for different type of woods.

Physical Characteristics

Finish

Clear

Colour

transparent

Solid/volume

42.67%

Density

0.99 kg/L

Viscosity by Brookfield viscometer

180 sec

Film Thickness
Wet film / dry film

60 micron / 38.4 micron

Thinning

If thinning is necessary, thin up to a maximum Of 10% white spirit

Recommended Coats

Apply 2 coats to appropriately prepared substrate

Ratio base / hardener

2 :1

Theoretical Coverage

16 m²/L

Gloss @ 60 degree

More than 60 degree

Surface Preparation: All the surface to be clean and dry. Remove all grease, oil, wax, or other material by solvent or detergent washing. Remove all loose, flaking or chalking surfaces.

Application Methods: Method: Brush, roller or spray gun.

Drying: Dry time is approx1-2 hours to be recoated after 12 hours and full cure 72 hours. The dry time will vary with temperature and humidity.

Packing: Gallon base 5 kg & hardener 2.5 kg                       

Storage & Shelf-life: Minimum 12 months in closed container. Keep container in a well-ventilated area. Close container after each use. Keep lid tightly closed during storage. Protect from direct sunlight and heat. The applicator should obtain more detailed information from the product label.

Health & Safety: Avoid contacts with eyes. Wash hands after use. Please read and observe all precautionary notices on container labels.

DISCLAIMER: The technical data presented in this bulletin are based upon the best available data and practices known to Eagle Paints at the present time. Since Eagle Paints is constantly improving its coatings and paint formulas, future technical data may vary somewhat from what was available when this bulletin was printed. Please contact your Eagle Sales Representative for the most up-to date information. Your feedback is important to us. If you have any comments or suggestions regarding our products and services, please share them with us.

Product for application

  • For wood
    • 0ne coat of N.C. sealer or polyester sealer
    • 2 coat of flatting varnish or top urethane varnish or polyurethane varnish 2k
Get in touch
Contact US